English
PRODUCTS
SFL.glass GEO PROFILE 76-20

Definition

PROFILE is created by thermal shaping of flat glass. The base glass is heated to its softening point, shaped on special fireproof moulds and then cooled under controlled conditions. PROFILE is brightly polished on top and, depending on the design, structured to a varying degree on the mould side. The visual quality of a design is achieved through the regularly alternating transparent and translucent areas. The variation of translucency, transparency, reflection, plasticity and rhythm creates the exceptionally variable effect of this designer glass.

Besides the standard designs, individual designs for projects and special applications may also be developed.

Note

PROFILED is not generally a regulated building product, meaning that the building regulations covering a specific application should be coordinated with the relevant building supervisory authorities. The application may require approval in individual cases. Since the base glass used is a regulated building product, the entire manufacturing process is subjected to monitored in-house production control and, in view of PROFILE already being used for façade glazing in several international projects, SFL.glass can meet all building regulatory requirements.

Applications

The light dispersing designer glass is suited for many interior and exterior applications demanding special aesthetic appeal and optical uniqueness, e.g.:
  • façade glazing, windows
  • partitions, doors
  • furniture, lamps
PROFILE is produced from EN 572 compliant float glass and is available in clear, colourless (= low iron oxide), bronze, grey, pink, green and blue colours. SFL.glass is supplied by all globally leading industrial glass manufacturers, meaning that any float glass available on the market can be refined.

Design

The exceptional effect of this symmetrical corrugated designer glass, used in London for the first time as façade glazing in the JCDecaux advertising tower adjacent to the M4, is achieved by the 3D corrugated geometry and the rhythmically alternating transparent and slightly structured translucent areas, respectively approx. 37 mm and 33 mm wide.

Transformed products

PROFILE Type 76-20 can be further processed into the following products (see Product range):
  • laminated glass, monolithic with PU synthetic resin coating
  • insulating glass = ECO INSULATED, possibly with protection from heat and sun and with noise dampening properties
  • curved glass = SHAPED
Surface refinement, e.g. with DECOR-COATED colour coating or sandblasting, is also possible.

This product was used in following projects: